Hi! To share my experience is i) Excentric Flux coating ii) Improper Flux formulation Regards Hegde P.B.
--- On Thu, 5/7/12, Materials & Welding <materials-welding@googlegroups.com> wrote:
From: Materials & Welding <materials-welding@googlegroups.com>
Subject: [MW:14767] Tapered burning of MMA electrode
To: materials-welding@googlegroups.com
Date: Thursday, 5 July, 2012, 12:14 PM
Dear Experts I am Facing a problem in SS 308-16 MMA electrode diameter 2.5 mm when I start welding It gives tapered burning of electrode what can be the possible reasons from welding point of view and electrode manufacturing point of view??? How this problem can be solved?
Regards, Ahmed -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
|
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment