Friday, July 13, 2012

[MW:14860] Maximum Spin Hole Diameter for Dish End

Dear Experts,
 
As per ASME section VIII Div I , UW-34, max. allowable patch diameter for a spin hole of dishend is 60 mm.
 
If, the dish end spin hole patch diameter is found to be of more than 60 mm then the dish end should be rejected, please correct me if I am wrong.
 
 
Thanks in advance.................

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...