Wednesday, July 4, 2012

[MW:14763] dissimilar base metal thickness clause

gud evening all,
As per ASME Section IX....dissimilar base metal thickness clause....for P no.8 if the base metal thickness is greater than 6 mm ....then it is qualified for unlimited base metal thk..................my question is if we have two diff thk 10 mm and 10.5 mm for p no.8 pqr ....then what would be the thk. limits according to this clause only not as per QW 451 table.............also if the same case is for P no.1 to P no.8 material then this clause is applicable or not ?................For considering Dissimilar thk what sholud be the minimum diiference between two base metals to be joined ? ................For example can we consider 10 mm and 10.1 mm as dissimilar thknesses as per ASME sectionIX?

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...