Re: [MW:14536] types of cracking in welding

Dear Mr. Singh,

 

The following information will help you to understand the basics of cracks.

 

Cracks that have been categorized as Type I, Type II, Type III and Type IV are given below.

 

The Type I and Type II cracking originate in weld metal, propagate either through the weld metal itself (Type I) or cross over in the HAZ (Type II).

The Type III cracking occurs in the coarse grain region of HAZ and by refining the grain size it can be avoided.

Type IV cracking nucleates and propagates in the intercritical/fine grain region of HAZ. It is not possible to avoid Type IV cracking but it can be minimized.

 

The above figure illustrates types of cracking in weld joint of steels on service exposure

 

Expect some more details from others.

 

Regards,

A Meganathan

Manager

Cochin Shipyard Limited

----- Original Message -----

From: Manindra Singh

To: materials-welding

Sent: Wednesday, June 13, 2012 3:56 PM

Subject: [MW:14531] types of cracking in welding

Dear Experts,

Can anyone please guide me about types of cracking in welding classified as Type I, II, III and IV cracking.

Any literature will help a lot.

Regards,

Manindra Singh

Sr. Inspection Engineer

Indian Oil Corporation Ltd.

Dear materials-welding ! Get Yourself a cool, short @in.com Email ID now!

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

  !-- Virus-Free Mail Using AntiVirus for PostMaster Enterprise & QuickHeal Engine --!