Unable to clarify as it is not mentioned whether the PQR is qualified on a groove joint or fillet joint. Also it is not clear that the new WPS proposed to be supported by the PQR qualified is meant for welding groove joints or fillet joints.
H. Das
On Mon, 11 Jun 2012 15:21:04 +0530 wrote
>Dear Experts,
Can we use S.S to S.S 8mm base metal thickness PQR of GTAW (3mm)+SMAW (5mm) for the making for new WPS of S.S to S.S with GTAW only, with 2mm base metal thickness only ?
Waiting for reply..
Regards.Parveen K. Nakwal
--
>
To post to this group, send email to materials-welding@googlegroups.com
>
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
>
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
>
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
>
| Follow Rediff Deal ho jaye! to get exciting offers in your city everyday. |
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment