Dear Vagal,
The repair can be attended for two times only and cut and re weld if repair found again.
The repair can be attended for two times only and cut and re weld if repair found again.
On 6 June 2012 07:33, Shashank Vagal <nach_sam@yahoo.com> wrote:
--
Gents,
A very sensitive issue for most of us, I am sure from time to time, particularly when we are working at site with limited inventories at a given time: How many times can a weld be repaired without impairing its quality? We are facing a cut out of plate butt weld (9% Ni) with no additional plates if required to replace the welded ones if they are condemned.
There was an article some time ago addressing this issue (http://www.twi.co.uk/services/technical-information/faqs/material-faqs/faq-how-many-times-can-a-weld-be-re-weldwed), but unfortunately it seems to have been taken off from TWI site.
Please advise.
Best regards,
Shashank Vagal
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment