Re: [MW:14305] ENiCrMo6 - AC operating

Thanks Mr.Saroj,

Please clarify the following points.

1) Are these mechanical values indicated in the catalogue can be chieved after welding with AC current of 150 to 170 Amps for 4mm electrode?

2) What is the "T" alloying element mentioned?

Regards,

Srinivasan

On Fri, May 18, 2012 at 11:05 AM, saroj kumar <sarojselva@gmail.com> wrote:

Dear Srinivasan,

Yes, the SMAW electrode ENiCrMo-6 is available for welding 9% Nickel steel base material for 

Low temp application with AC. 

You can go for BOHLER brand FOX NIBAS 60/15, which is highly suitable. The catalogue is attached

herewith for your perusal. 


Thanks/Best Regards,

M.Saroj Kumar

Chennai,India.

On Wed, May 16, 2012 at 4:58 PM, Srinivasan Jagannathan <jsrisud@gmail.com> wrote:

Dear Experts,

We have a job to be welded with ENiCrMo6 which operates on DC.

We need to weld with AC current due to Arc Blow / Magnetism.

Is it possible to have SMAW electrode of same specification, operating on AC without compromising Mechanical Properties?

Please advice.

Regards,

Srinivasan

--

To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
J.SRINIVASAN

GENERAL MANAGER - TRAINING

D&H SECHERON - INDORE

Mob: 7898989756

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.