Also, if kept on source side, there will be considerable enlargement of entire IQI, includong wire image!
--- On Tue, 15/5/12, Doni Afrizal <doni.afrizal@gmail.com> wrote:
From: Doni Afrizal <doni.afrizal@gmail.com>
Subject: Re: [MW:14277] RT Source Side/Film Side
To: materials-welding@googlegroups.com
Date: Tuesday, 15 May, 2012, 3:19 PM
Based on ASME V must on source side. If no access may put on film side. Based on logic, source side IQI will represent more accurately radiation absorption of material being inspected. Regards Doni ASNT MT/PT/RI Level 2 -- To post to this group, send email to materials-welding@googlegroups.comTo unsubscribe from this group, send email to materials-welding+ unsubscribe@googlegroups.comFor more options, visit this group's bolg at http://materials-welding.blogspot.com/The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
|
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment