Tuesday, May 15, 2012

Re: [MW:14278] RT Source Side/Film Side

hi

as per ASME section 5, article 2, sub section T-277, the IQI is supposed to be placed on the source side and if it is difficult to place the IQI on source side you can place it on the film side with a letter F made of lead and placed in such a way that it doesnt disturb the welds clarity on film.....

IQI should be located there when u do radiographic testing or else the film is not valid.......

On Mon, May 14, 2012 at 10:45 PM, Vino Varghese <vinopvarghese@gmail.com> wrote:
Dear Experts,
 
I would like to know which gives the best result - whether to place the IQI on source or film side?
and what is the reason...
Whether it have affect the result in interpretation?
If we forget to place the IQI as required, i mean on the film side, how to judge from the film?
 
Thanks & Regards
Vino-Doha

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.



--
Thanks & Regards
Srirammadhan
Piping/painting inspector
Great drill Chaaya
Great Ship
Hamriyah Free zone, UAE


--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...