Re: [MW:14255] RE: 14217] Flux-Electrode Combination required.

If weld is subjected to Normalizing and then Stress releiving, 7
serious electrode will not work out, after heat treatment strenght
will come below minimum requirements,
Pl go for 8serious loke 8018-G ( tenaloy 60/65) for SMAW and for SAW
go for alloy steel wire -B2
Pandithan
In-Charge/WT
Cethar Ltd

On 5/9/12, pgoswami <pgoswami@quickclic.net> wrote:
> Mr. Ansari,
>
> *
>
> What's the design code?
> *
>
> any impact test requirements
> *
>
> any hardness requirements?
>
>
> Appreciate your response.
>
> Thanks.
>
>
> Pradip Goswami,P.Eng.IWE
>
> Welding & Metallurgical Specialist
>
> Ontario, Canada.
>
> Email-pgoswami@sympatico.ca <blocked::mailto:Email-pgoswami@sympatico.ca> ,
>
> pgoswami@quickclic.net <blocked::mailto:pgoswami@quickclic.net>
>
>
>
> _____
>
> From: materials-welding@googlegroups.com
> [mailto:materials-welding@googlegroups.com] On Behalf Of ansari intekhab
> alam
> Sent: Tuesday, May 08, 2012 6:25 AM
> To: materials-welding@googlegroups.com
> Subject: [MW:14217] Flux-Electrode Combination required.
>
>
> Dear Experts
> Hi ,
> further can anyone suggest me that the electrode for SMAW and Electrode and
> flux wire combination for SAW Process.
> Details as are
> 1. Material - SA 516-70
> 2.Thickness-70 mm
> 3.Normalizing- ( 920 Deg - 150 min ) + Dress relieving ( 620 Deg - 350
> Minutes ).
> also please suggest that how we can choose the electrodes and fluxes for a
> particular weld by using ASME Section 2 Part C.
>
> -
> Regards
> Ansari Intekhab Alam
>
>
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
>

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.