Hi,
You have not mentioned, which code you are following
for your production/fabrication weld.
for your production/fabrication weld.
In API 6A para 6.3.2.7 - welding controls specify as below:
" Instruments to indicate temperature,voltage,and ampearage shall be serviced and calibrated in accordance with the manufacturers written specification"
Manivannan.
On Fri, May 11, 2012 at 8:14 AM, mpk mpk <ranmi2007@gmail.com> wrote:
--Dear Experts,Any where mentioned about welding machine calibration is required for pipeline.need Reference.Thank you,Yem Pee.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
MANIVANNAN.P
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment