We use Lincoln 865 Flux.
I hope it will be helpful.
Valeria
0280 154267865
De: "pgoswami" <pgoswami@quickclic.net>
Para: <materials-welding@googlegroups.com>
Fecha: 08/05/2012 23:58
Asunto: [MW:14218] RE: 14217] Flux-Electrode Combination required.
Enviado por: materials-welding@googlegroups.com
Mr. Ansari,
- What's the design code?
- any impact test requirements
- any hardness requirements?
Appreciate your response.
Thanks.
Pradip Goswami,P.Eng.IWE
Welding & Metallurgical Specialist
Ontario, Canada.
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of ansari intekhab alam
Sent: Tuesday, May 08, 2012 6:25 AM
To: materials-welding@googlegroups.com
Subject: [MW:14217] Flux-Electrode Combination required.
Dear Experts
Hi ,
further can anyone suggest me that the electrode for SMAW and Electrode and flux wire combination for SAW Process.
Details as are
1. Material - SA 516-70
2.Thickness-70 mm
3.Normalizing- ( 920 Deg - 150 min ) + Dress relieving ( 620 Deg - 350 Minutes ).
also please suggest that how we can choose the electrodes and fluxes for a particular weld by using ASME Section 2 Part C.
-
Regards
Ansari Intekhab Alam
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
__________________________________________________________________ La información contenida en este mensaje es confidencial, y puede ser usada exclusivamente por aquellas personas a las cuales está dirigida, dentro de los límites establecidos para su uso. Si este mail es recibido por error, agradeceremos a su receptor tenga a bien informar esa circunstancia al emisor, dirigiendo el mensaje a la dirección de correo electrónico que lo haya remitido. En tal hipótesis, además, se solicita no copie ni revele el mensaje, como así tampoco divulgue su contenido a terceras partes, para evitar un eventual comportamiento ilícito. Las opiniones contenidas en este mensaje son exclusivas de su emisor y no representan necesariamente la opinión de la empresa. The information contained in this message is confidential, and is intended exclusively for the individuals who have been specifically addressed, considering the limitations established for its use. If this mail is received by error, please inform the sender and return the message to the email address that had sent it. In such case, please do not copy or disclose the message or its contents to any third party in order to avoid any unlawful conduct. The statements included in this message belong only to the sender and do not necessarily constitute the company s view. |
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment