Re: [MW:14223] RE: 14217] Flux-Electrode Combination required.

Hi, Ansari,

if the working temperature under –40deg.C, concerning that you have a PWHT progress, I suggest that you may choose below products.

- SMAW: E7018-1

- SAW/Flux: F6P8-EM12K

 

Bohler, ESAB, Lincoln are right for you.

 

Roy

 

 

From: pgoswami

Sent: Wednesday, May 09, 2012 10:57 AM

To: materials-welding@googlegroups.com

Subject: [MW:14218] RE: 14217] Flux-Electrode Combination required.

 

Mr. Ansari,

• What's the design code?
• any impact test requirements
• any hardness requirements?

 

Appreciate your response.

 

Thanks.

 

Pradip Goswami,P.Eng.IWE

Welding & Metallurgical Specialist

Ontario, Canada.

blocked::mailto:Email-pgoswami@sympatico.ca,

blocked::mailto:pgoswami@quickclic.net

 

 

---

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of ansari intekhab alam
Sent: Tuesday, May 08, 2012 6:25 AM
To: materials-welding@googlegroups.com
Subject: [MW:14217] Flux-Electrode Combination required.

Dear Experts 

Hi ,

further can anyone suggest me that the electrode for SMAW  and Electrode and flux wire combination for SAW Process.

Details as are

1. Material - SA 516-70

2.Thickness-70 mm

3.Normalizing-  ( 920 Deg - 150 min )  +  Dress relieving ( 620 Deg - 350 Minutes ).

also please suggest that how we can choose the electrodes and fluxes for a particular weld by using ASME Section 2 Part C.

-
Regards
Ansari Intekhab Alam

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.