Tuesday, May 29, 2012

[MW:14390] Re: MMA welding Electrode Gets red hot

uneven coating or flux coating not concentric, try with different
brand

On May 29, 5:03 pm, murtaza...@yahoo.com wrote:
>  I have a MMA welding electrode of SS 308L Dia. 2.6mm. when half of
> the electrode is consumed it get red hot, and it gives porosity in the
> weld metal what could be the reason i.e. is it a welding problem or
> there is a problem in the electrode???
> if this problem is due to electrode then what can be the reasons and
> rectifications???

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...