Dear Sir,
Both are possible but we have to slightly bend the film(cassette) to get a clear image(i.e) :- the cassette must be very closely packed with the joint. I think this will be giving you a good result.
On Tue, Jan 10, 2012 at 3:27 PM, Desai Jignesh (Mumbai - Piping) <J.J.Desai@ticb.com> wrote:
--Can somebody write me about the possibility of either radiography OR Ultrasonic testing of attached butt weld?
We have tried to carry out radiography with and without non metallic support as in the attached snaps but image is not clear.
Regds/Jignesh
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
R.Balaganapathylingam
QC - Lead Engineer,
FLSmidth.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment