Tuesday, January 10, 2012

Re: [MW:13440] RE: 13437] ASME Sec. IX changes 2011a - Query on Heat input calculation for weld overlay

Hi Vijayan,

Thanks for your reply.

What is changes in QW 409.29. I could not find any difference between
previous and present edition. Can you please eloborate on it.

Regards

VENKAT

On 1/9/12, vijayan <vijayan.m@madinagulf.com> wrote:
> Hi Venkat
>
>
>
> Per Sec IX, QW409.26, for first layer only, an increase of more than 10% of
> Heat input or volume of weld metal qualified requires Requalification.
>
>
>
> This restriction is only applied to first layer due to the reason that, an
> increase in heat input or volume of WM on first layer, may increase the
> tendency to have more dilution with the base metal.
>
>
>
> In your case, first pass (first Layer-E309LMo) is 0.815 Kj/mm. this can be
> increased to 0.815*1.1=0.896Kj/mm.
>
>
>
> Other passes, there is no restriction on heat input.
>
>
>
> The first layer
>
> QW409.26 refers back to QW409.1 to calculate the heat input or volume of
> weld metal. there you will get more info about wave form controlled welding.
>
>
>
> [cid:image001.png@01CCCEE9.EEC0DB20]
>
>
>
> BR
>
> M.Vijayan
>
>
>
>
>
> -----Original Message-----
> From:
> materials-welding@googlegroups.com<mailto:materials-welding@googlegroups.com>
> [mailto:materials-welding@googlegroups.com] On Behalf Of N VENKATESWARA
> PRASAD
> Sent: Monday, January 09, 2012 2:36 PM
> To: materials-welding
> Subject: [MW:13437] ASME Sec. IX changes 2011a - Query on Heat input
> calculation for weld overlay
>
>
>
> Dear All,
>
>
>
> As per Sec IX 2011 a , there were some changes in Heat input calculation
> regarding overlay. Can any body explain me with expample.
>
>
>
> We have one corrosion overlay qualified on CS material with E309LMO and E
> 316L.
>
>
>
> The heat input for first pass is 0.815 KJ/mm
>
> , second pass 0.7 KJ /mm
>
> final pass 0.715 KJ/mm
>
>
>
> What changes to done in in the WPS as per ASME Sex. 2011a.
>
>
>
>
>
> Regards
>
>
>
> Venkat
>
>
>
> --
>
> To post to this group, send email to
> materials-welding@googlegroups.com<mailto:materials-welding@googlegroups.com>
>
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com<mailto:materials-welding+unsubscribe@googlegroups.com>
>
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
>
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
>
> ________________________________
> This communication and any files transmitted with it are confidential and
> may also be privileged. It is for the exclusive use of the intended
> recipient(s). If you are not the intended recipient or the person
> responsible for delivering it to the intended recipient(s), please note that
> any form of distribution, copying or use of this communication or
> information contained in it is strictly prohibited and may be unlawful. If
> you have received this communication in error please return it to the
> sender, and delete the material from any computer. We reserve the right to
> monitor email communications through normal internal and external networks.
> We believe but not warrant that the email and the attachments are virus
> free. The statement and opinions expressed in this communication are those
> of the writer and do not necessarily represent those of Madina Group, whose
> registered office address is
>
> P.O. Box 20459, Doha, Qatar.
> Tel. +974 44600818
> Fax. +974 44603143
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
>

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...