Dear Mr.Sandeep,
-- Inclusion content acceptance is based on the severity of usage of component; E45 does not give any acceptance. Cleaner the material, better the mechanical properties.
--
2012/1/4 sandy <sandeepdhiman63@gmail.com>
Dear all
Can anybody please tell what is the acceptance level of the non
metallic inclusion in steel?
The determination on the non metallic inclusion in steel as per ASTM
E45-1.
Please note that the acceptance level lased on Macro not in UT.
Thanks
Regards
Sandeep Kumar
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
regards,
Harish.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment