Friday, October 21, 2011

Re: [MW:12742] existence of

No need to worry if the valve functioning ok.Water is used for hydrotest normally.

On Thu, Oct 20, 2011 at 2:30 PM, ENAYAT ZAREI <zarei.enayat@gmail.com> wrote:
Dear All,

can anybody help :

we have some some small bore (1/2" ~ 1 1/2") gate valve in stock, when we open the valve by hand wheel and wedge goes up, some water comes out from inside of valve:

now my questions :

1-what is this water i n valve?
2-is it related to Hydro test?
3-can we reject these valves?

your prompt reply would be highly appreciated.

Regards,
Zarei

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...