Thursday, October 13, 2011

[MW:12666] maximum penetration in welding proccesses

 
 Hi ,
 
I googled about max. penetration that can be obtained in arc welding proccesses and find below article from TWI.
 
 I would like to know accrding to proccesses and welding parameters is there any calculation for penetration that can be obtained.
 
Thanks.
 
"The conventional arc welding processes can penetrate into the base metal by only a limited amount.
 
The maximum penetration in conventional TIG or manual metal arc (SMAW) welds is in the region of 3mm,
 
MAG (GMAW) welds around 6mm and
 
submerged arc some 15mm."
 
 
 
 
 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...