Thursday, September 22, 2011

Re: [MW:12501] Pulsing Frequency & Heat Input calculation in P-GTAW(Hot Wire) process

Hi,

I would provide info in detail later but if you watch "Pulse Tig explained" in Youtube, would brief you nicely.

Regards
Manpreet Singh 

From: "K.Babu" <kbabupsg@gmail.com>
Sent: Thu, 22 Sep 2011 02:01:40
To: materials-welding@googlegroups.com
Subject: [MW:12488] Pulsing Frequency & Heat Input calculation in P-GTAW(Hot Wire) process
Gents,
 
Could some one share on the above topic

Thanks & regards,

K.Babu

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.


Treat yourself at a restaurant, spa, resort and much more with Rediff Deal ho jaye!

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...