Hi, In this case Inconel625 is a basematerial.Because you are going to weld on Inconel625 only not on AISI 4130.
Thanks & Regards,
(Karthik)
Karthikeyan.S QA/QC Manager Getabec Energy Co.,Ltd. 379,Moo6,Soi8,Nikhomphatana, Rayong-21180, Thailand. Phone: 0066 38 897035-8 (Off) Fax: 0066 38 897034 Hand Phone: 0066 892512282
--- On Sun, 9/11/11, K.Babu <kbabupsg@gmail.com> wrote:
From: K.Babu <kbabupsg@gmail.com>
Subject: [MW:12425] Welder Qualification-ASME Sec IX- Clad materials
To: materials-welding@googlegroups.com
Date: Sunday, September 11, 2011, 9:37 PM
Gents, I have confused on the above topic, could some one clarify the below situation 1) 21" ID ,Pipe (AISI 4130 ) cladded by INconel 625 with thickness of 1.5 mm with qualified Welding Procedure in other company. 2) We need to overlay the above item 1 , by inconel 625 on the existing Inconel 625 3) If i want to qualify the welder, i need to consider the Inconel 625 as base metal or AISI 4130 as base metal ? Pls share your exp, in as this kind of situation
Thanks & regards,
K.Babu
-- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
|
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment