Skip to main content

Re: [MW:12427] Engineers Day

Mokshagundam Vishveshwarya was born on August 28, 1860 and Muddenahalli(a village) in Chikballapur Taluk, Kolar district, Mysore (Now Karnataka). Vishveshwarya completed his lower secondary course at Chikballapur. After completing his high-school, he joined the central college having stood first in engineering, it was not difficult for him to enter the Bombay Government Service. He joined the engineer's kader as an Assistant Engineer. The first test of his ability was when he was entrusted with the construction of SYPHON on the river Panjra at Dashari, a village 35 miles from Dhulia. 


Visveswaraiya proved his mettle in the world scenario. This was the inspiring force that led to the idea of building a world-class technical institute. This is how Vishveshwarya Institute was born.
Vishveshwarya Institute is more than just a hall of residence it's a place where you'll do a lot of living, studying and socialising. Your College community will include graduate, Postgraduate and research students, teachers and lecturers. 

Dr. M Visveswaraya was a great statesman, administrator, and engineer and he was awarded the coveted Bharat Ratna in 1955. He was an honorary life fellow of the Institution of Engineers (India).His birthday September 15th is observed as 'Engineers Day'
 

Chandrakant mohikar
(CSR, PDO)

On Sat, Sep 10, 2011 at 9:06 AM, muthu barathi <muthu_barathi@rediffmail.com> wrote:

Hi Friends,

Please share your information of First Engineers Day celebrated in India by whom,
when & where ?
We know that every year we celebrate on 15 September India's Engineers Day in
the memories of our Sir M. Vishveshvaraya.

For forth coming celebration I want to know the answer as no body knows the
answer including me. Also now which one we are going to celebrate 44 th year or
151 year? Please give the answer.


Dear Sir,





Thanking You,

Honesty is the best Policy

With Warm Regards,

Muthu Barathi P
Mobile No:00962788269821 (Jordan)
00962775401951

Treat yourself at a restaurant, spa, resort and much more with Rediff Deal ho jaye!

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

Comments

Popular posts from this blog

Re: [MW:34105] SA266 GR4N 4 Cycle SPWHT

Hi,  You are correct, Minimum refers to the one cycle for which this part will expose until final work shop PWHT. hence mill test certificate shall include this.  Max. SPWHT, refers to additional cycles of heat treatment that are reserved for future repairs during equipment lifetime.  Again, these simulated no. Of cycles shall be specified in MTC.  The idea is we need to make sure that steel mechanical properties are not compromised upon exposure to multiple repairs (i e 4 cycles in your case).  One could say, if steel is subjected to 4 cycles and is ok, then it should by defacto be good for one cycle, yet, this is wrong assumption cause mechanical problems and microstructure of materials varies accordingly based on no. Of cycles for which material will expose. This is apparent in alloy steel and especially for impact test values as an example.  In your case, this forged CS with properties before PWHT can be understood to be " as forged" condition (i.e. Wit...

Materails FAQs

Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? (asked by: boris.vielhaber@vait.com) A: DIN Nr. = 2393 T.2, 2394 T.2, EN 10025 W. Nr. DIN 17007 = 1.0038 Design DIN 17006 = RSt 37-2, S235JRG2 (Fe 360 B) Q: What is St DIN 2391 BK material? (asked by: dmcandrews@automaticstamp.com) A: Precision steel tubes, cold-finished/hard. Q: What is C.D.W. Boiler Tube? (asked by: montydude123@yahoo.com) A: Cold Drawn Welded Boiler Tube. Q: WHAT IS W.Nr. 1.4301? PLS TELL US IN EASY LANGUAGUE (asked...

Heat tint (temper) colours on stainless steel surfaces heated in air // Heat tint

Introduction The colour formed when stainless steel is heated, either in a furnace application or in the heat affected zone of welds, is dependent on several factors that are related to the oxidation resistance of the steel. The heat tint or temper colour formed is caused by the progressive thickening of the surface oxide layer and so, as temperature is increased, the colours change.   Oxidation resistance of stainless steels However, there are several factors that affect the degree of colour change and so there is no a single table of colour and temperature that represents all cases. The colours formed can only be used as an indication of the temperature to which the steel has been heated. Factors affecting the heat tint colours formed Steel composition The chromium content is the most important single factor affecting oxidation resistance. The higher the chromium, the more heat resistant the steel and so the development of the heat tint colou...