Yes CVN is mandatory. you may carry out the impact test as per requirement and
if it passes go ahead
On Sat, 10 Sep 2011 13:59:21 +0530 wrote
>Dear Experts,
�
For crosshead installation in jetty project, the following materials (37mm) are
used.
�
Road way����������� - S355JO
Crosshead���������� - S355JR & S275JR
Pipe track����������� - S355JR
�
As per European structural steel standard EN10025 , for JR grade, Longitudinal
charpy V-notch impacts 27J @20 degrees and for JO grade, Longitudinal charpy V-
notch impacts 27J @ 0 degrees.
�
We received materials mill certificates w/o impact test.
�
My question is whether impact is mandatory for above grades or any criteria of
thickness as per EN10025? Please mention with reference codes.
�
Your valuable suggestions are appreciated.
�
Regards
�
arvinda
�
--
>
To post to this group, send email to materials-welding@googlegroups.com
>
To unsubscribe from this group, send email to materials-
welding+unsubscribe@googlegroups.com
>
For more options, visit this group's bolg at http://materials-
welding.blogspot.com/
>
The views expressed/exchnaged in this group are members personel views and
meant for educational purposes only, Users must take their own decisions w.r.t.
applicable code/standard/contract documents.
>
Dear Sir,
Thanking You,
Honesty is the best Policy
With Warm Regards,
Muthu Barathi P
Mobile No:00962788269821 (Jordan)
00962775401951
Treat yourself at a restaurant, spa, resort and much more with Rediff Deal ho jaye! --
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment