Re: [MW:12399] Distance between two butt joints in pipe weld

B31.3 is silent about that..so you need to refer back to project or client specification..some of client specify 2x or 50mm..

On Fri, Sep 9, 2011 at 2:33 PM, iulian oprea <iu_oprea@yahoo.com> wrote:

 

Linde Engineering standards says:

 

5 time of thickness, or 50 mm, whichever is greater.

 

regards

Iulian Oprea

From: pradip kumar sil <pradipsil@gmail.com>
To: materials-welding@googlegroups.com
Sent: Friday, September 9, 2011 7:23 AM
Subject: [MW:12383] Distance between two butt joints in pipe weld

Dear exparts,

As per ASME B  31.3 what is the minium spacing to be maintened between two butt weld in pipe & where is it mentioned

Is it three times of thickness or 25 m.m  whichever is greater.

Regards

Pradip --
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.