Wednesday, September 7, 2011

Re: [MW:12363] WPS based on contractor PQR

Hi
 
It is allowed, provided the WPS has to be approved by EPC contractor, Pls refer QW 201
 
 

On Wed, Sep 7, 2011 at 8:01 PM, G Padmanabhan <gpadmana@gmail.com> wrote:
Hi,
As per ASME Sec IX,  EPC Contractor qualified WPS/PQR for carbon steel material.Based on contractor qualified PQR,whether subcontractor can prepare WPS and use for welding. EPC contractor will take operational control and responsibility of welding activities.

 code of construction is ASME B31.3.

Please throw some light on QW 200.


--
Nothing is difficult, you just didn´t understand it yet...
 
With Warm regards,

G.Padmanabhan


--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.



--
Thanks & regards,

K.Babu
Singapore

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...