Wednesday, August 17, 2011

Re: [MW:12253] W.Q.P. Ranges

John
For thickness limitations see table QW-452.1(b) and for dia see QW-452.3  in ASME IX i hope you will got your answer.
 
--
Regards,
MUHAMMAD ASIM MUNIR
QA/QC ENGINEER
RANA FORT ENGINEERING & CONTRACTING
ABU DHABI U.A.E
CELL #+971555184232 (Active)
+923007815592

"QUALITY IS MORE IMPORTANT THAN QUANTITY"
P Please consider the Environment before printing this E-Mail


On Wed, Aug 17, 2011 at 2:55 PM, john clough <johnclough692@hotmail.com> wrote:
Sirs
Does anyboby have referance regarding Diameter and thickness ranges for welder qualification tests for ASME Section1X.
 
John

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.



 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...