Monday, August 1, 2011

Re: [MW:12023] Minimum thickness range for welder qualification.

Hi,
As per ASME.,There is no minimum thickness range for welder/Welding perator. If a welder qualfied with the test specimen thickness(t) less than 13mm ,he can weld up to 2t. Or if he qualified with the specimen thickness more than or equal to 13mm,he can qualified for maximum to be welded.

Thanks & Regards,

(Karthik)

Karthikeyan.S
QA/QC Manager
Getabec Energy Co.,Ltd.
379,Moo6,Soi8,Nikhomphatana,
Rayong-21180,
Thailand.
Phone: 0066 38 897035-8 (Off)
Fax: 0066 38 897034
Hand Phone: 0066 892512282


--- On Sun, 7/31/11, mpk mpk <ranmi2007@gmail.com> wrote:

From: mpk mpk <ranmi2007@gmail.com>
Subject: [MW:12002] Minimum thickness range for welder qualification.
To: materials-welding@googlegroups.com
Date: Sunday, July 31, 2011, 4:56 PM

Dear experts,

What is the minimum thickness range for welder qualification.

Thank you
MPK
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...