Friday, August 19, 2011

[MW:12273] FW: 11108] DUPLEX S.S. (S.S. 2205) TO AUSTENITIC S.S. (Grade 316L) welding.

U can use E2209 or E309MoL
Ahmed Osman
Sr Q.C. Eng.

-----Original Message-----
From: materials-welding@googlegroups.com
[mailto:materials-welding@googlegroups.com] On Behalf Of CHINTUKUMAR GANDHI
Sent: Saturday, May 21, 2011 12:21 PM
To: materials-welding@googlegroups.com
Subject: [MW:11108] DUPLEX S.S. (S.S. 2205) TO AUSTENITIC S.S. (Grade 316L)
welding.

Dear Experts,

I come across with very strange welding combination. That is Duplex
stainless steel to ausatenitic steel welding. Here Flange is SS 316 L & pipe
is duplex stainless steel (2205).

plz guide me abt which filler wire I should use? & which good engineering
practises should adopt during welding.

Chintu Gandhi

Welding Engineer

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to
materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and
meant for educational purposes only, Users must take their own decisions
w.r.t. applicable code/standard/contract documents.


--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...