Tuesday, July 26, 2011

Re: [MW:11941] FCAW for Duplex stainless steel

use of Argon+ 2% nitrogen as a shielding gas is a good option.

On Tue, Jul 26, 2011 at 6:13 AM, Vanchinath S.A. <vanchinaths@gmail.com> wrote:
Try FSH( selectarc ) superduplex basic flux cored wire with Argon/co2 mix gas.
vanchi

On Sat, Jul 16, 2011 at 8:31 AM, 박종민(PARK, JONG MIN) <carpediem@dsme.co.kr> wrote:

Dear Experts

 

I wan to use FCAW process for welding of duplex stainless steel.

However, CVN value shall be min.50 Joule at -46 degree C.

Is there any flux cored wire which meets this requirement?

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...