Wednesday, July 20, 2011

Re: [MW:11840] Where we can find Impact testing recorded values @ - 34 C for SA 537 CL 1 Material

Hiii ,
 
Design Code is API 620 ..
 
Wait for your earlier response
 
Suresh

On Wed, Jul 20, 2011 at 10:08 PM, Raghuram Bathula <raghurambathula@gmail.com> wrote:
What is your design code?


On Wed, Jul 20, 2011 at 8:26 PM, Suresh <bobsuresh24@gmail.com> wrote:
Dear All ,
 
I would like to requesting you that ....We are doing Ammonia Tank erection which is using SA 537 CL 1 material ...
 
Now we are doing PQR for 537 Material @ - 34 C (which has tested by manufacturer ) and as per MDMT .
 
My Question is that here we can find the Impact recorded values for SA 537 CL1 @ - 34 C ...I need which code it was showing ...Client need that copy prior to go for PQR .
 
--
Thanks  & Best Regards,

Suresh

Mobile No: 91-92 92 905 905



--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.



--
Thanks  & Best Regards,

Suresh

Mobile No: 91-92 92 905 905

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...