Re: [MW:11829] Inconel Overlay Precautionery steps

current and voltage range is also very important.  more the current, more is the penetration  more will be dilution and it becomes difficult to get iron content less than 5%

Best regards

On Mon, Jul 18, 2011 at 12:27 PM, K.Babu <kbabupsg@gmail.com> wrote:

Gents,

 

I would like to some suggestions, on inconel overlay on S355J2 without PWHT

 

What are the steps to taken to reduce the iron content less than 5 %

 
Thanks & regards,

K.Babu

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.