Re: [MW:11811] Welding of SA 516 Gr.70

We typically used GMAW, SMAW & SAW, it would be a little difficult to weld the closing seam with just SAW, but on Long Seams we usually do it with all SAW.

On Sun, Jul 17, 2011 at 8:30 AM, kannayeram gnanapandithan <kgpandithan@gmail.com> wrote:

what u follow is generally followed, and based on joint efficiency , sigle side weld or double side is decided, pl refer section VIII Div 1

pandithan

On Sat, Jul 16, 2011 at 12:18 PM, rinshu <rinshad043@gmail.com> wrote:

Dear all,

Can anyone explain about the most widely accepted welding procedure
for welding of shell in pressure vessel

i expect the details of process,welding electrode,whether back
chipping is require or not

Regards

Rinshad A

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.