Dear Mr P.Goswami
We are using only ASME B 31.1 & IBR codes for general pipe bends, we are not refering specifically for Induction bending.
Bend pipe details:
SA 335 P22, Φ660x44mm,
Bend pipe details:
SA 335 P22, Φ660x44mm,
ROB-991mm, DOB-90°,
Intrados temperature-1050°C,
Extrados temperature-990°C,
Extrados temperature-990°C,
Quench type-Air quench.
Hardness shall be around 200 Hv
Hardness shall be around 200 Hv
Pandithan
On Mon, Jul 4, 2011 at 3:58 PM, pgoswami <pgoswami@quickclic.net> wrote:
--What's the induction bending code you're following? What's the pipe wall thickness? Is there any hardness restriction the bends?Appreciate your feedback.Thanks.Pradip Goswami,P.Eng.IWEWelding & Metallurgical Specialist & ConsultantOntario,Canada.Email-pgoswami@sympatico.ca,
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of kannayeram gnanapandithan
Sent: Sunday, July 03, 2011 11:16 AM
To: materials-welding@googlegroups.com
Subject: [MW:11583] PBHT FOR SA335GrP22
DEAR EXPERTSIS IT REQUIRED TO DO PBHT FOR P22 MATERIAL WHICH WAS BENT IN INCREMENTAL HOT INDUCTION PIPE BENDING WITH TEMP 990 DEGRE CELSIUS WITH AIR QUENCHINGPANDITHANIN-CHARGE/WELDING TECHCETHAR LIMITEDTRICHY--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment