Monday, July 11, 2011

Re: [MW:11677] LNG Tank Material selection

Dear Limesh,
PNO:-11A,
ASTM A553 Gr 1
Filler Metal Class :-ERiCrFe-9
F NO:43,
A NO;5.11
Thanks
Regards
Uthanmalliah Nagarajan



--- On Mon, 11/7/11, limesh M <limesh78@gmail.com> wrote:

From: limesh M <limesh78@gmail.com>
Subject: [MW:11666] LNG Tank Material selection
To: "Materials & Welding" <materials-welding@googlegroups.com>
Date: Monday, 11 July, 2011, 2:40 PM

Dear All,


What is the material normally used for LNG(Liquefied Natural Gas) tank fabrication?

I got some information that 9%Ni steel is OK(Still,I am not sure the authenticity of this information).

Apart from 9%Ni,any other material suitable for cryogenic application?

Actually what is this 9%Ni steel?

What is the correct designation of this 9%Ni steel in ASTM?



Regards,

Limesh
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...