Sunday, July 10, 2011

Re: [MW:11655] Re: E7018-A1 Electrod

Dear sir
 
The difference between E7018 it contains iron powderd content
 E7018-a1 refers to  chemical composition in asme sec II part c search E-7018-A1 & read out notes point you get the answer of this
only the thing writeen in standatd A-Z refers only chemical composition of electrode
 
pravean
QA/QC welding inspector
ksa
jubail  

2011/7/5 R. Moseley <robert.moseley40@yahoo.com>
Zakaria,
The "A1" designation is for the addition of Chrome moly to the
normally full carbon steel filler metal mixture. It is normally used
for welding/ joining of P3 (Carbon .5Mo materials). In this case it
would not be wise or advisable (as the client has dictated) to use a
filler metal without the addition of the Moly. Hope this helps.

Robert Moseley
Welding Specialist/ Consultant

On Jul 5, 10:11 am, Zakaria ghrab <zakaria.gh...@gmail.com> wrote:
> Hi All,
>
>   In our boiler project we have to weld socket tube A210 Gr A1,  38 mm
> diameter , 4 mm thick  to collector P11 material thick , according client
> WPS we have to weld by E7015-A1.
>
> What's the difference between EXXXX and EXXXX-A1
> May E7018 substitue E7015-A1 ?
>
> Kind regards
>
> --
> *زكرياء غراب
> **GHRAB Zakaria** *
> مسؤول عن الجودة
> QA/QC SENAD
> مشروع المحطة الحرارية ـ الوحدة الرابعة
> المحمدية ـ المغرب

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...