Re: [MW:11644] How can identify rolling direction in plate?

Dear Limesh,

u have only one way to identify the rolling direction by making Macro etching for the surface then u will find out the grains boundaries elongation direction 

On Fri, Jul 8, 2011 at 6:57 AM, limesh M <limesh78@gmail.com> wrote:

Dear All,

For preparing test pieces for PQR, the following item to be fulfilled as per a document.

"For butt weld test assemblies Identification of the rolling direction of the used plates shall be provided."

My query is that,is it possible to identify the rolling direction by naked eye?If possible what is the trick behind it?



Regards,

Limesh

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--

Best regards,
 
Tarek Yehia
QA/QC Inspection Engineer
BEMCO Steel Industries, Jeddah, Saudi Arabia
E-mail: t.yehia2009@gmail.com
            

Cell. #+966546154198

          +966567726160

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.