Saturday, July 2, 2011

Re: [MW:11566] A 106 Gr B 2" Pipes IMPACT TEST

it is required based on MDMT (Minimum Design Metal Temp) and thickness, check with your designer whether base material requires impact testing?

if your governing code is ASME B31.3 check para 323.2.2 and table 323.2.2

On Fri, Jul 1, 2011 at 8:02 PM, lassaad mokrani <lassaad.mokrani@gmail.com> wrote:
Dear Experts,
Is impact test required by ASME (in PQR) or only by service conditions for 2" A106 Gr B pipe works???

Best Regards,
--
Meilleures salutations

Mokrani Lassaad
00216 20 649 755


--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...