Yes ,
You need to follow Project Specification which has approved by the client ....Golden Joint required 100 % RT ,there is no code says anything in this case ......
Client has to give you that requirement and it is general practice ...
Suresh
On Mon, May 16, 2011 at 6:24 PM, Venkat Ramulu <cvramulu@yahoo.com> wrote:
--Dear Experts,Can any body clarify that,is it pluss joint acceptable in piping, as per B31.3 or ASME ,if 100% RT taken. Pl give code referance.Thanks and regards,C.V.Ramulu
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
Thanks & Best Regards,
Suresh
Mobile No: 91-92 92 905 905
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment