You can use stylus instrument to ensure the surface finish..
br,
msms
On Thu, May 12, 2011 at 12:02 PM, mustaffi <mustaffi@dynac.com.my> wrote:
--Hi All..
Did anybody teach me how to check by calculation for inspection on raise face surfaces
Samples : Requirement on surfaces nozzle shall have smooth finish 3.2 to 6.3 Micro meter..
Please advise..
Regards
Mus
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment