Friday, May 13, 2011

Re: [MW:11043] pup piece in every 1 km

This is required during scraping the pipeline by the inspection instrument scraper / Calliper Run.

 

Regards,

 

Sohaib



From: limesh M <limesh78@gmail.com>
To: Materials & Welding <materials-welding@googlegroups.com>
Sent: Thu, May 12, 2011 8:02:32 AM
Subject: [MW:11038] pup piece in every 1 km

Dear All,
 
Why some client specification requires 6 m pipe pup piece in every 1 km pipeline?
 
Regards,
 
Limesh

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...