Tuesday, April 5, 2011

Re: [MW:10601] Weaving

The codes indirectly address weaving by making heat input an essential variable when there is a toughness requirement.

A weave 3 times electrode diameter just became a rule of thumb because it is a general rule that works well.  It is not a rule that should apply to all welding or all materials.  A welding or metallurgical engineer should be consulted to determine what limitation should be put in place.

On Apr 5, 2011 5:35 AM, "Ahmed Husain" <ahmraha@yahoo.com> wrote:

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...