Friday, April 1, 2011

RE: [MW:10575] DPT for Structural welding

no need to do DPT for rootrun BUT IF BACKGOUGING is consider  then DPT required but 10% DPT should be done for final weld.

Regard,
Narendra P. Makode,
Production Engineer,
Wheels India Ltd.
Heavy Engineering Ltd. Deoli,Wardha.

M : 09049993668
Email:-
narendra_pmakode@yahoo.co.in


--- On Fri, 1/4/11, Bathula Raghuram (Mumbai - PIPING) <R.Bathula@ticb.com> wrote:

From: Bathula Raghuram (Mumbai - PIPING) <R.Bathula@ticb.com>
Subject: RE: [MW:10574] DPT for Structural welding
To: "'materials-welding@googlegroups.com'" <materials-welding@googlegroups.com>
Date: Friday, 1 April, 2011, 5:11 PM

None by code, it shall be specified by the designer

 

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Feroz Mohammed
Sent: Friday, April 01, 2011 5:05 PM
To: materials-welding@googlegroups.com
Subject: [MW:10573] DPT for Structural welding

 

Dear All

 

Can any body tell me if it is required to do DPT for root run & after final welding in structural steel. If yes how much percentage

 

CODE: AWS D1.1

--

Thanks & Regards
Feroz Mohammed
Deputy Manager-QA&I

LANCO Infratech Ltd.

È : +91 9650490097
 

 


--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...