Dear All,
Design Code: ASME Sec VIII, Div 1
U-Stamp Pressure Vessel
Reference Code : ASME Sec IX, Edition 2007, Add 09
Material of Construction: SA 516 Gr 70N(30mm thk)
PQR Material : 1. Pipe - ASME SA 333 and 2. Flange : ASTM A350 LF2
Query:
Is it mandatory that Qualification has to be done only with a ASME Material?
If ASTM Material is used for qualification, then WPS will be qualified only for that particualr Material and cannot be Qualified as P1 Material. Please provide all reference from Code for justification.
Hope to see that i was able to communicate properly with regard to raised query.
Expecting as usual response from all sides.
Thanks & Regards
Vino-Doha
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment