Tuesday, March 29, 2011

Re: [MW:10522] orientation of Check valve

Dear Sir,

Thanks for your valuable reply... I got massage from
some friends they are said to me, "can changes the orientation only
with spring type swing check valves but the flapper type swing check
valve cannot changes the orientation". Any way thanks for your advise
once again.

On 3/27/11, Hafiz Ali Alvi <alimalvi300@hotmail.com> wrote:
>
> Dear Saamy,
>
> Swing check valves are installed in horizontal lines. you can check vendor
> installation manual for further details.
>
> Regards.
>
>> Date: Sat, 26 Mar 2011 07:53:26 -0700
>> Subject: [MW:10493] orientation of Check valve
>> From: krishnasamy1968@gmail.com
>> To: materials-welding@googlegroups.com
>>
>> I would like to know the types of check valve and orientation of Check
>> valve (Bolted cover Swing type -service - liquid ammonia). Could we
>> it's placed as horizontal or 45 deg orientation.
>>
>> Thanks in Advance.
>>
>> Saamy
>>
>> --
>> To post to this group, send email to materials-welding@googlegroups.com
>> To unsubscribe from this group, send email to
>> materials-welding+unsubscribe@googlegroups.com
>> For more options, visit this group's bolg at
>> http://materials-welding.blogspot.com/
>> The views expressed/exchnaged in this group are members personel views and
>> meant for educational purposes only, Users must take their own decisions
>> w.r.t. applicable code/standard/contract documents.
>
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
>

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...