Dear Sirs,
In Europe it’s not allowed to use glass fiber products anymore because of health issues, please take this in consideration for your welders safety as well.
Met vriendelijke groeten / Best Regards
Herman Pieper
Pieper Quality Support & Inspection
Phone: +31 (0)521 380083
Fax: +31 (0)84 7539225
Cell: +31 (0)6 51691215
www.pieper-qsi.nl
Van: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] Namens Shanmugam Palanisamy
Verzonden: vrijdag 11 maart 2011 20:13
Aan: materials-welding@googlegroups.com
Onderwerp: Re: [MW:10287] RE: 10270] dear experts
This case, you can use fibrefoam glass as a purging damper.
On Fri, Mar 11, 2011 at 9:36 AM, Pieper QSI <pieper-qsi@kpnmail.nl> wrote:
Dear Sir,
I know there is some adhesive Aluminium tape which can be used as backing material for locations where you can’t get any other backing material in place. This material is fairly resistant to heat and easy to apply so I think this will be useful for your application as tape for creating closed purging chambers as well.
Met vriendelijke groeten / Best Regards
Herman Pieper
Pieper Quality Support & Inspection
Phone: +31 (0)521 380083
Fax: +31 (0)84 7539225
Cell: +31 (0)6 51691215
Van: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] Namens nadakuditi kiran kumar
Verzonden: donderdag 10 maart 2011 14:40
Aan: materials-welding@googlegroups.com
Onderwerp: [MW:10270] dear experts
dear experts,
we have a wps with purging & pre heat also.we con't use paper type of plaster on top of weld joint because of preheat.can any one suggest the right material.
thanks & regards
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment