Friday, March 11, 2011

Re: [MW:10285] Mechanical Testing of A36 25 mm ThK Plate 3G FCAW Process, As per AWS D1.1. for WPS Qualification, Impact is required or not?

Dear Srinivas
For high Tensile material ,It is very much necessary to do impact test
.Test temperature will be vary as per the grade of the material( (As
per IACS).

Samshuddin.K
Bharati shipyard limited

On Thu, Mar 10, 2011 at 9:24 PM, Srinivas Engr
<srinivas.gmsrini@gmail.com> wrote:
> Dear All,
>
> As per AWS D1.1,
> Base material - A36,
> 25mm Thk Pl,
> FCAW process,
> E71T1 - Filler material
> 3G position.
>
> From table 4.2 says tensile & bend test is enough.
> But  I get heared from one great testing Labratory tat Imapct test is
> also required?
> Pl confirm me about this WPS, wat are the test need for WPS
> qualification.
> Experts pl comment on above..
> Those having qualified WPS of above welcome to comment..
>
> Regards
> Srinivas
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at http://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
>

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...