No requirement for the CVN tests for the A36 material
Thanks & Regards,
K. Babu
----- Original Message -----
From: "Srinivas Engr" <srinivas.gmsrini@gmail.com>
To: "Materials & Welding" <materials-welding@googlegroups.com>
Sent: Thursday, March 10, 2011 11:54 PM
Subject: [MW:10268] Mechanical Testing of A36 25 mm ThK Plate 3G FCAW
Process, As per AWS D1.1. for WPS Qualification, Impact is required or not?
> Dear All,
>
> As per AWS D1.1,
> Base material - A36,
> 25mm Thk Pl,
> FCAW process,
> E71T1 - Filler material
> 3G position.
>
> From table 4.2 says tensile & bend test is enough.
> But I get heared from one great testing Labratory tat Imapct test is
> also required?
> Pl confirm me about this WPS, wat are the test need for WPS
> qualification.
> Experts pl comment on above..
> Those having qualified WPS of above welcome to comment..
>
> Regards
> Srinivas
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment