Tuesday, March 1, 2011

Re: [MW:10080] In-service welding qualification of SS pipe line

Hi,
 
You can refer BS 6990 (Welding on steel pipes containing process fluids or their residuals)
 

1 Scope

This code covers operations relating to and involving arc welding on ferritic steel and austenitic stainless steel land or offshore pipelines and process plant pipework which contain or have contained a process fluid and which are at least 5 mm thick. It gives details of procedures prior to, during and after all these operations.

Thanks,
 
Rajasekhar

On Mon, Feb 28, 2011 at 11:24 AM, joshi jaydeep <jaydeep.p.joshi@gmail.com> wrote:
Dear all,
 
As per the scope of API 1104, It is restricted to be used for CS and LAS material.
 
Which code is to be followed for In-service welding qualification of SS pipe line.
 
 

Jaydeep Joshi | Welding Engineer, TDW India Limited

Plot No 16 | Phase –III | Alindra – Savli G.I.D.C | Taluka : Savli | Vadodara – 391 775

Board : +91-2667- 619900 | Fax : +91- 2667- 619501| Extension : 7845

E-Mail : jaydeep.joshi@tdwilliamson.com  | www.tdwilliamson.com

Cell: +91 9978959626

P    Before printing, Think about ENVIRONMENTAL responsibility

 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...