Tuesday, March 29, 2011

[MW:10517] Re: Equivelent standard for ASME Section 1X to ISO

HI
There are a no. of european standars for materials grade.
Tell which material you arelooking for, so that I can tell you the
relevant standard.

Regards
Sandeep Kumar

On Mar 29, 12:27 am, john clough <johnclough...@hotmail.com> wrote:
> Dear Sirs
> I need to review material certificates regarding material grades, mechanical tests etc, these material certificates are ISO 3-1, I am familiar with ASME Section 1X which is where I would look for this information if I was working to ASME Standards, where would I find the same information working to ISO standards.
>
> Thankfully
>
> John                                      

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...