Friday, March 11, 2011

[MW:10279] RE: 10270] dear experts

Dear Sir,

 

I know there is some adhesive Aluminium tape which can be used as backing material for locations where you can’t get any other backing material in place. This material is fairly resistant to heat and easy to apply so I think this will be useful for your application as tape for creating closed purging chambers as well.

 

Met vriendelijke groeten / Best Regards

 

Herman Pieper

 

Pieper Quality Support & Inspection

Phone: +31 (0)521 380083

Fax:     +31 (0)84 7539225

Cell:     +31 (0)6 51691215

www.pieper-qsi.nl

 

Van: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] Namens nadakuditi kiran kumar
Verzonden: donderdag 10 maart 2011 14:40
Aan: materials-welding@googlegroups.com
Onderwerp: [MW:10270] dear experts

 

dear experts,

 

we have a wps with purging & pre heat also.we con't use paper type of plaster on top of weld joint because of preheat.can any one suggest the right material.

thanks & regards

 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...